INTEGRATING THE NATURAL STEP ELEMENTS INTO ENVIRONMENTAL MANAGEMENT SYSTEMS

In 1988, Dr. Karl-Henrik Robert began the process of developing the principles and objectives that have become known as The Natural Step.

Robert convened a group of over 100 Swedish scientists and asked them to develop a vision for a sustainable society based on the scientific principles. The Natural Step framework (Robert, 1991) was the result of this effort and is becoming widely recognized.

In this framework, there are four underlying principles or conditions and four guiding objectives

These system conditions are:

Nature should not be subject to systematically increasing concentrations of substances extracted from the Earth’s crust;

Nature should not be subject to increasing concentrations of substances produced by society;

Nature should not be subject to systematically increasing degradation by physical means; and

People should not be subject to conditions that systematically undermine their capacity to meet their needs.

These conditions can be converted to four objectives that are more easily understood:

Eliminate our community’s contribution to fossil fuel dependency and to the wasteful use of scarce metals and minerals;

Eliminate our community’s contribution to dependency upon persistent chemicals and the wasteful use of synthetic substances;

Eliminate our community’s contribution to encroachment upon nature; and Meet human needs fairly and efficiently.

To apply The Natural Step, Boisvert et al. (1999) recommend an A-B-C-D approach: Awareness, Baseline Analysis, Compelling Vision, and Down to Action. Kent County chose to align its program with The Natural Step because of its simplicity and scientific basis.

An environmental management system (EMS) is a set of processes and practices that enable an organization to reduce the environmental impacts from its operations and increase efficiency. It helps the organization to systematically manage its environmental “footprint.” Alternatively, according to the ISO definition (ISO, 2004) an EMS is “a part of an organization’s management system used to develop and implement its environmental policy and manage its environmental aspects.” It is built upon the concept of continuous improvement and follows a four element Plan-Do-Check-Act cycle. The EMS is an evolving process and is consistently modified to accommodate new information, changing circumstances and changes in organization priorities.

The critical components of each of the four elements are:

Planning, includes identifying environmental aspects and establishing goals [Plan];

Implementing, includes training and operational controls [Do];

Checking, includes monitoring and corrective action [Check]; and

Reviewing, includes progress reviews and acting to make needed changes to the EMS [Act].

There are a variety of reasons that an organization may develop and implement an EMS. The reasons are many and varied and often depend upon the type of organization. A business with international offices has different reasons than a public agency to develop and implement an EMS. Table 1 provides a list of the most common of these reasons.

Some disadvantages to developing and implementing an EMS relate to the costs associated with development of the program and include:

An investment of internal resources, including staff/employee time;

Costs for training of personnel;

Costs associated with hiring consulting assistance, if needed; and

Costs for technical resources to analyze environmental impacts and improvement options, if needed.

Critical factors that assure the success of any management system include:

Commitment from senior management;

Designated staff including a Core team to act as a cheerleader and a representative trained in the program;

Involvement of all employees in the covered fenceline;

Dedicated resources;

A link to the overall strategic planning of the organization;

Sufficient time to develop and implement the program;

Proper follow through on the checking and acting components; and

A willingness to make the cultural shift required for the program to succeed.

The ISO 14001 guidance lists 17 elements, shown in Table 2, as the foundation of an EMS.

Several documents and publications cover the various elements of an EMS in detail. One of these is the US EPA publication “Achieving Environmental Excellence: An Environmental Management Systems (EMS) Handbook for Wastewater Utilities,”

IS0 14001 – HISTORICAL DEVELOPMENT

Firstly ISO 14000 environment system standards was prepared in June of 1992 year in Rio at world apex and this standard brooks decisions of this world apex and Rio contract principles. After 1 year, ISO established one technique committee which is yielded by 50 different country representatives to prepare international environment management system in 1993 year. ISO 14001 environment management system standard was issued in September of 1996 year with works of this committee. ISO 14001 standard is used as voluntary now but ISO 14001 will be burden by coercions of societies, international organizations, states in the future. Levels which environment management system passed are the following briefly:
= Europe community countries issued I action plan in 1973 year (to practice protecting preventions of environment )= BS 7750 Standard in 1992= Rio Declaration in 1992 year= ISO/TC 207. Environmental management technique committee was established in 1993 year to develop ISO 14000 family standards= TS 9719 standard (environment management system – General features) in 1994 year= ISO 14001 standard in 1996 year= ISO 14001 current version in April of 2005 Nisan 2005

ISO 14001:2004 Standards Contents

ISO 14001:2004 Standards
ISO 14000 is a series of international standards on environmental management. It provides a framework for the development of an environmental management system and the supporting audit programme.
The main thrust for its development came as a result of the Rio Summit on the Environment held in 1992.
ISO 14000 is an Environmental Management System (EMS), which requires that an organization consider the environmental aspects of its products and services.
Iso14000 approach forces you to take a hard look at all areas of your business that has an environmental impact.
Iso14000 is the world’s first series of Internationally accepted Standards for Environmental Management Systems (EMS).
Iso14000 elevates Environmental Management to a Strategic Level that can be applied to any organization, from any industry, anywhere in the world.
ISO 14000 is a series of voluntary standards and guideline reference documents.
The part of the overall management system that includes organizational structure, planning activities, responsibilities, practices, procedures, processes and resources for developing, implementing, achieving, reviewing and maintaining the environmental policy.
Iso14000 is the world’s first series of Internationally accepted Standards for Environmental Management Systems (EMS).
Iso14000 elevates Environmental Management to a Strategic Level that can be applied to any organization, from any industry, anywhere in the world.
ISO 14000 is a series of voluntary standards and guideline reference documents.
The part of the overall management system that includes organizational structure, planning activities, responsibilities, practices, procedures, processes and resources for developing, implementing, achieving, reviewing and maintaining the environmental policy.
ISO 14000 is an Environmental Management System (EMS) who’s purpose is:
· A management commitment to pollution prevention.
· An understanding of the environmental impacts (reducing) of an organization’s activities.
A commitment (pollution prevention) to employees, neighbors and customers
ISO 14001 is the corner stone standard of the ISO 14000 series. It specifies a framework of control for an Environmental Management System against which an organization can be certified by a third party.
The environment cannot be protected by our convictions or goodwill alone. Efforts to protect the environment must be planned, coordinated and organized into a system, such as ISO 14001.
ISO14001 requires an Environmental Policy to be in existence within the organisation, fully supported by senior management, and outlining the policies of the company, not only to the staff but to the public. The policy needs to clarify compliance with Environmental Legislation that may effect the organization and stress a commitment to continuous improvement. Emphasis has been placed on policy as this provides the direction for the remainder of the Management System.
Those companies who have witnessed ISO9000 Assessments will know that the policy is frequently discussed during the assessment, many staff are asked if they understand or are aware of the policy, and any problems associated with the policy are seldom serious. The Environmental Policy is different, this provides the initial foundation and direction for the Management System and will be more stringently reviewed than a similar ISO9000 policy. The statement must be publicised in non-technical language so that it can be understood by the majority of readers. It should relate to the sites within the organisation encompassed by the Management System, it should provide an overview of the company’s activities on the site and a description of those activities. A clear picture of the company’s operations.
The preparatory review and definition of the organization’s environmental effects is not part of a ISO14001 Assessment, however examination of this data will provide an external audit with a wealth of information on the methods adopted by the company. The preparatory review itself should be comprehensive in consideration of input processes and output at the site. This review should be designed to identify all relevant environmental aspects that may arise from existence on the site. These may relate to current operations, they may relate to future, perhaps even unplanned future activities, and they will certainly relate to the activities performed on site in the past (i.e. contamination of land).
The initial or preparatory review will also include a wide-ranging consideration of the legislation which may effect the site, whether it is currently being complied with, and perhaps even whether copies of the legislation are available. Many of the environmental assessments undertaken already have highlighted that companies are often unaware of ALL of the legislation that affects them, and being unaware, are often not meeting the requirements of that legislation.
The company will declare its primary environmental objectives, those that can have most environmental impact. In order to gain most benefit these will become the primary areas of consideration within the improvement process, and the company’s environmental program. The program will be the plan to achieve specific goals or targets along the route to a specific goal and describe the means to reach those objectives such that they are real and achievable. The Environmental Management System provides further detail on the environmental program. The EMS establishes procedures, work instructions and controls to ensure that implementation of the policy and achievement of the targets can become a reality. Communication is a vital factor, enabling people in the organisation to be aware of their responsibilities, aware of the objectives of the scheme, and able to contribute to its success.
As with ISO9000 the Environmental Management System requires a planned comprehensive periodic audit of the Environmental Management System to ensure that it is effective in operation, is meeting specified goals, and the system continues to perform in accordance with relevant regulations and standards. The audits are designed to provide additional information in order to exercise effective management of the system, providing information on practices which differ to the current procedures or offer an opportunity for improvement.
In addition to audit, there is a requirement for Management Review of the system to ensure that it is suitable (for the organization and the objectives) and effective in operation. The management review is the ideal forum to make decisions on howe to improve for the future.
The newly revised ISO 14001:2004 specifies the requirements for an environmental management system (EMS), which provides a framework for an organization to control the environmental impacts of its activities, products and services, and to continually improve its environmental performance. It applies to those environmental aspects which the organization can control and over which it can be expected to have an influence. It does not itself state specific environmental performance criteria. ISO 14001:2004 is applicable to any organization that wishes to:
· implement, maintain and improve an environmental management system
· assure itself of its conformance with its stated environmental policy
· demonstrate such conformance to others
· seek certification/registration of its environmental management system by an external organization
· make a self-determination and self-declaration of conformance with this international standard.
All the requirements in this standard can be incorporated into any environmental management system. Having been revised, the improved ISO 14001 is now expected to bring the benefits of implementing an EMS to more businesses than ever. The standard is now easier to understand and use and has more detailed checklists for inputs and outputs from the management review and has increased compatibility to ISO 9001. Organizations who are currently registered to ISO 14001:1996 will have an 18-month transition period to register to ISO 14001:2004.

Five Steps to Implementing ISO 14001:2004

ISO 14001 provides a logical, common-sense approach for
businesses to adopt. To start it is recommended to carry out an
environmental review of the business and the Annex to the Standard
provides guidance on the approach required. The Standard then
requires a management system to be developed that addresses the
key environmental issues that were identified by the review as being
relevant to the business, through a rational programme of control and
continual improvement.
There are five key steps to ISO 14001 EMS implementation, and
subsequent operation which are clearly laid out in just three pages of
text.
The five key steps are:
1. Environmental Policy
2. Planning
3. Implementation and Operation
4. Checking and Corrective Action
5. Management Review
Step 1. Environmental Policy
The company or organisation must write an environmental policy
statement which is relevant to the business activities and approved by
top management. Their full commitment is essential if environmental
management is to work. The ISO 14001 Standard clearly sets out
what to cover in the policy. Often a one page document is sufficient.
Produce a first issue and expect to amend it several times before
assessment and registration as knowledge grows in the company.
Step 2. Planning
Plan what the EMS is to address.
Environmental aspects
First make lists of the environmental aspects (issues) that are relevant
to the business. The environmental review mentioned earlier should
provide most of this information and the Annex to ISO 14001 provides
guidance on the format for doing this.
Consider the inputs, outputs and processes/activities of the business in
relation to;
a) emissions to air
b) releases to water
c) waste management
d) contamination of land
e) use of raw materials and natural resources
f) other local environmental and community issues
Consider both site (direct) and offsite (ie. indirect) aspects that you
control or have influence over (such as suppliers) and in relation to
normal operations, shut-down and start-up conditions and reasonably
foreseeable and emergencies situations.
A simple written procedure is then required to determine which of the
aspects identified are really or probably significant (important) and
training needs, outline the key stages of the project and dates that will
lead to the target achievement).
Gradually apply environmental management programme thinking to
such things as the introduction of new products, new or improved
processes and other key activities of the business. In particular,
ensure existing projects become environmental management projects
where there is a significant environmental impact involved, so that the
EMS becomes company wide. This is a frequent oversight found
during ISO 14001 assessments. The EMS must cover the whole
business – like a net thrown over the whole business and for example
including such things as engineering and maintenance
Step 3. Implementation and Operation
Structure and responsibility
Appoint one or more people, depending on the size of the business, to
have authority and responsibility for implementing and maintaining the
EMS and provide sufficient resources. (It’s worth monitoring costs
carefully and benchmarking these against key consumption figures so
that improvements delivered by the EMS become apparent).
Training, awareness and competence
Implement a procedure to provide environmental training appropriate
to identified needs for management, the general workforce, project
teams and key plant operators. This can have far reaching benefits
on employee motivation. The workforce is usually very supportive of
moves to achieve genuine environmental improvement. Every
company has its share of cynics but even some of these can be won
over with time. Training will vary from a general briefing for the
workforce to detailed environmental auditor training.
Communication
Implement procedures to establish a system of internal and external
communication to receive environmental information and respond to it
and to circulate new information to people that need to know. This will
include: new legislation, information from suppliers, customers and
neighbours and communications both with employees and for
employees about progress with the EMS. This process can often
generate worthwhile ideas from employees themselves for future
environmental improvements.
Environmental management system documentation
The EMS itself needs to be documented with a manual, procedures
and work instructions but keep it brief and simple. The Standard
clearly states where procedures are required. Eleven system
procedures are required to maintain the EMS, plus operating work
instructions but if you already have ISO 9000, this will cover most of six
of the procedures required and a quality system can certainly be
expanded to cover ISO 14001 as well. Cross reference the EMS
manual to other environmental and quality documents to link the EMS
and to integrate it with existing business practices.
Operational control
Implement additional operating procedures (work instructions) to
control the identified significant (important) aspects of production
processes and other activities. Some of these will already exist but
may need a ‘bit of polish’. Don’t forget significant aspects that relate to
goods and services from suppliers and contractors.
Emergency preparedness and response
Implement procedures to address reasonably foreseeable
emergencies and to minimise their impact should they occur. (eg. Fire,
major spillages of hazardous materials, explosion risks etc.)
Step 4. Checking and Corrective Action
Monitoring and measurement
Implement procedures to monitor and measure the progress of
projects against the targets which have been set, the performance of
processes against the written criteria using calibrated equipment (verify
monitoring records) and regularly check (audit) the company’s
compliance with legislation that has been identified as relevant to your
business. The most effective way of doing this is through regular
progress meetings.
Nonconformance and corrective and preventive action
Implement procedures to enable appropriate corrective and
subsequent preventive action to be taken where breaches of the EMS
occur (eg. process control problems, delays in project process, noncompliance
with legislation, incidents etc.).
Records
Implement procedures to keep records generated by the
environmental management system. The Annex to the Standard
suggests those that are likely to be required.
Environmental management system audit
Implement a procedure to carry out audits of each part of the EMS and
company activities and operations to verify both compliance with the
EMS and with ISO 14001. Audit results must be reported to top
management . A typical audit cycle is one year but more critical
activities will require auditing more frequently.
Step 5. Management Review
At regular intervals (typically annual), top management must conduct
through meetings and record minutes of a review of the EMS, to
determine that it is still appropriate and effective or to make changes
where necessary. Top management will need to consider audit
results, project progress, changing circumstances and the requirement
of ISO 14001 for continual improvement, through setting and achieving
further environmental targets.

The ISO 14000 Challenge

The building blocks of an environmental management system is an understanding of aspects and impacts.
Implementing ISO 14001 begins with identifying how an organisation’s business activities impact on the environment.
Many organisations believe they are already aware of the significant aspects and impacts of their operations.
The process of implementing ISO 14001 may uncover significant impacts not previously identified and allows for a consistent approach to analysis.
Generally this analysis is done department by department or centre by centre.
It is best if it is a team approach that involves the employees who do the activity. An employee's
familiarity with a task is essential for both the identification of the environmental impacts of business activities and the determination or implementation of control measures.
An aspect is any element of an organisation’s activities, products or services that can interact with the environment.
An impact is the change caused to the environment. Impacts may occur during normal and abnormal operating conditions, such as accidents and emergencies.
Aspects can often be isolated by analysing the inputs and outputs of an activity.

EVALUATION OF IMPACTS
Once the impacts have been determined they have to be evaluated.
Criteria for evaluation include environmental concerns such as the severity of the impact, and business concerns such as potential regulatory and legal exposure, the probability of the impact occurring, the cost of changing the impact and effect on public image.
This type of evaluation highlights the significant impacts. These, in turn, determine the significant aspects. Once the significant aspects have been determined, targets and objectives can be set.

What Is an Environment Management System (EMS) ?

An EMS can be described as a program of continuous environmental improvement that follows a defined sequence of steps drawn from established project management practice and routinely applied in business
management. In simple terms these steps are as follows:
• Review the environmental consequences of the operations.
• Define a set of policies and objectives for environmental performance.
• Establish an action plan to achieve the objectives.
• Monitor performance against these objectives.
• Report the results appropriately.
• Review the system and the outcomes and strive for continuous improvement.
Not every system will present these steps in exactly the same way, but the basic principles are clear and easily understandable.
The ISO 14000 series is a series of standards for different aspects of environmental management. A number of these standards relating to environmental management systems have been adopted formally by
the members of the ISO, while others are in different stages of preparation.
The standards that have been adopted are (as of early 1997):
ISO 14001-1996 Environmental management systems:
specification with guidance for use
ISO 14004-1996 Environmental management systems:
general guidelines on principles, systems, and supporting techniques
ISO 14010-1996 Guidelines for environmental auditing:
general principles of environmental auditing
ISO 14011-1996 Guidelines for environmental auditing:
audit procedures; auditing of environmental management systems.
ISO 14012-1996 Guidelines for environmental auditing:
qualification criteria for environmental auditors Standards currently available as draft international standards:
ISO 14021 Environmental labels and declarations:
self-declaration environmental claims; guidelines and definition and usage of terms.
ISO 14040 Environmental management: life cycle assessment; principles and framework
ISO 14050 Environmental management: vocabulary More than half a dozen others in this series have been drafted and are under discussion.

ISO 14001 STANDARD

ISO 14001 is in fact a series of international standards on environmental management. It provides a framework for the development of an [url=htttp://www.iso9001store.com/]environmental management system[/url] and the supporting audit programme.
The ISO 14001 series emerged primarily as a result of the Uruguay round of the GATT negotiations and the Rio Summit on the Environment held in 1992. While GATT concentrates on the need to reduce non-tariff barriers to trade, the Rio Summit generated a commitment to protection of the environment across the world.
After the rapid acceptance of ISO 9000, and the increase of environmental standards around the world, the International Standards Organisation (ISO) assessed the need for international environmental management standards. They formed the Strategic Advisory Group on the Environment (SAGE) in 1991, to consider whether such standards could serve to:
Promote a common approach to environmental management similar to quality management;Enhance organizations’ ability to attain and measure improvements in environmental performance; andFacilitate trade and remove trade barriers.In 1992, SAGE’s recommendations created a new committee, TC 207, for international environmental management standards. This committee and its sub-committees included representatives from industry, standards organizations, government and environmental organizations from many countries. What developed was a series of ISO14000 standards designed to cover:
-environmental management systems-environmental auditing-environmental performance evaluation-environmental labelling-life-cycle assessment-environmental aspects in product standards
ISO 14001 was first published as a standard in 1996 and it specifies the actual requirements for an environmental management system. It applies to those environmental aspects over which an organization has control and where it can be expected to have an influence.
ISO 14001 is often seen as the corner-stone standard of the ISO 14000 series. It specifies a framework of control for an Environmental Management System and is the only ISO 14000 standard against which it is currently possible to be certified by an external certification body. However, it does not in itself state specific environmental performance criteria.

Nonconformity, Corrective Action and Preventive Action in ISO 14001 EMS

The intent of §4.5.3 is that the organization put in place procedures for 1) identifying actual and potential nonconformities to EMS requirements, 2) taking appropriate corrective or preventive action, and 3) reviewing the effectiveness of corrective or preventive actions taken.The nonconformity requirement of ISO 14001:1996 was a passive requirement in that it was only triggered when a nonconformity came to the attention of the organization through one of the other EMS procedures, such as the EMS audit or management review. ISO 14001:2004, however, requires that the organization establish and maintain procedures to identify actual or potential nonconformities, determine their causes, take action to avoid recurrence or occurrence, record results, and review effectiveness of corrective or preventive actions.
How the organization goes about identifying actual or potential nonconformities is up to it to determine. From the standpoint of registration auditors, it would seem that they would want to see a specific procedure requiring members of the organization to conduct some kind of periodic checklist driven, walk-through inspection for nonconformities. In addition, the procedure should allow for submission of nonconformities by any member of the organization. Actual nonconformities are usually fairly evident and relatively easy to investigate because there is a tangible occurrence with which to deal. The organization should also want to evaluate minor instances of nonconformity that, while not significant in and of themselves, if they occurred under different circumstances, could lead to a significant deviation from the EMS. Such “near misses” could be identified by the occurrence of a sudden, unexpected event, a failure to achieve an objective or target, or a deviation from the Environmental Policy.Potential nonconformities are more difficult to identify and correct. Here, application of Failure Mode and Effects Analysis would be appropriate for organizations having that capability.
When investigating nonconformities, organizations should focus on identifying underlying root causes, not just the immediate manifestation of the problem. If a chemical storage drum leaks, the organization should take action, first, to mitigate the damage and, then, to determine why the leak occurred; e.g., improper or negligent handling, mechanical failure, or lack of a leak detection system. Corrective or preventive actions should then focus on eliminating the cause through training, communication of procedures, use of leak-resistant drums, or installation of a leak detection system.
Other ISO 14001 sections, principally Emergency Preparedness and Response, Internal Audit, and Management Review, are tools that the organization implements in order to help identify instances of actual or potential nonconformity. The underlying principle of these sections is that the identification of nonconformities should be made by the organization through diligent application of these tools, not from the occurrence of an environmental event, a customer or community complaint, or investigation by a regulatory authority. While §4.5.3 does not specifically mention disciplinary action, in many cases disciplinary action or the threat of disciplinary action is appropriate to prevention of future nonconformities. Many organizations have written codes of conduct that give employees notice that deviations from the codes will not be tolerated and that prescribed penalties can result for infractions. These codes can be expanded to include penalties for deviations from the EMS. If so, penalties should be commensurate with the violation itself and should acknowledge the nature of the environmental damage, the degree of negligence, prior conduct, and the forthrightness of the employee being disciplined. Any such code and its remedies should be administered fairly and consistently and should have as its objective correction and prevention of EMS nonconformities, not punishment of employees.Finally, identification, investigation, and correction of nonconformities leads to the need to revise documented procedures.

Evaluation Of Compliance Of ISO 14001 EMS

The requirement to establish a procedure for periodically evaluating compliance with applicable legal and other requirements falls short of specifically requiring regulatory compliance audits but, in fact, a system of regular regulatory compliance audits may be the most practical means for meeting this requirement of the standard. In the U.S., determination of whether to conduct a compliance audit will be governed in part by the particular jurisdiction’s approach to allowing a legal privilege for the self-assessment audit.
Evaluation vs. Audit – The difference between an evaluation and audit can only be determined by looking outside of ISO 14001. Consulting a dictionary reveals that an evaluation involves a determination of value or worth and that an audit is an examination of accounts done by persons appointed for the purpose. A better definition `is the more specific ISO 19011:2002, Guidelines for Quality and/or Environmental Management Systems Auditing, which defines an audit as a “systematic, independent, and documented process for obtaining audit evidence and evaluating it objectively to determine the extent to which the audit criteria are fulfilled.” Many organizations do not have a system for evaluating regulatory compliance other than their own records and the inspections of regulatory officials. This lack of a verification system can be a risky way to operate. Reports of enforcement actions and consent agreements show that many organizations are blindsided by rogue employees who violate rules and falsify documents to cover up environmental misdeeds. Although ISO 14001 does not prescribe a specific approach to evaluation of regulatory compliance, organizations should consider methods for going beyond verification of records by collecting and evaluating physical evidence.

Measurement and Evaluation In ISO 14001:2004

After implementing the environmental policy, management needs to measure environmental that the data can be verified by an internal or external auditor.
interventions and their impact on the environment. This is done by building up an environmental effects register (environmental inventory). All equipment used for monitoring and measuring must be accurate and calibrated on a regular basis. To check the compliance status of an organization, additional information about regulations and other requirements is needed. A so called environmental regulations register?Eis often installed and maintained for this purpose. To obtain a better picture about the financial consequences of environmental protection, the accounting system should reflect environmental costs. Therefore, information about environmentally-induced costs and earnings needs to be collected. All this information should be recorded in such a manner.er
Environmental Performance Evaluation Accesses Environment Performance against environmental targets and objectives and against applicable environmental regulations. Responsibilities and authority need to be defined to deal with non-compliance within the EMS. This includes specifying the actions to be taken to correct an undesirable ituation and to prevent future non-compliance.
The analysis of environmental and economic performance leads to eco efficiency, the key component in sustainable business management.
The analysis of environmental and economic performance leads to eco
efficiency, the key component in sustainable business management. The recording of physical environmental data, environmental regulations and environmentally-induced financial information is necessary as a basis for effective decision making. Therefore, financial, legal and ecological data systems must be built up from scratch or adapted to the requirements of the EMS standard.

What is ISO14000 Environmental Management Systems

What is ISO 14000?ISO 14000 is a series of international standards on environmental management. It provides a framework for the development of an environmental management system and the supporting audit programme.
The main thrust for its development came as a result of the Rio Summit on the Environment held in 1992.
ISO 14000 is an Environmental Management System (EMS), which requires that an organization consider the environmental aspects of its products and services.
Iso14000 approach forces you to take a hard look at all areas of your business that has an environmental impact.
Iso14000 is the world’s first series of Internationally accepted Standards for Environmental Management Systems (EMS).
Iso14000 elevates Environmental Management to a Strategic Level that can be applied to any organization, from any industry, anywhere in the world.
ISO 14000 is a series of voluntary standards and guideline reference documents.
The part of the overall management system that includes organizational structure, planning activities, responsibilities, practices, procedures, processes and resources for developing, implementing, achieving, reviewing and maintaining the environmental policy.
ISO 14000 is an Environmental Management System (EMS) who’s purpose is:
· A management commitment to pollution prevention.
· An understanding of the environmental impacts (reducing) of an organization’s activities.
A commitment (pollution prevention) to employees, neighbors and customers
The History of ISO 14000As a number of national standards emerged (BS 7750 being the first), the International Organization for Standardisation (ISO) created a group to investigate how such standards might benefit business and industry. As a result this group recommended that an ISO committee be created to create an international standard.
What is ISO 14001?ISO 14001 is the corner stone standard of the ISO 14000 series. It specifies a framework of control for an Environmental Management System against which an organization can be certified by a third party.
The environment cannot be protected by our convictions or goodwill alone. Efforts to protect the environment must be planned, coordinated and organized into a system, such as ISO 14001.


· ISO 14004 provides guidance on the development and implementation of environmental management systems
· ISO 14010 provides general principles of environmental auditing (now superseded by ISO 19011)
· ISO 14011 provides specific guidance on audit an environmental management system (now superseded by ISO 19011)
· ISO 14012 provides guidance on qualification criteria for environmental auditors and lead auditors (now superseded by ISO 19011)
· ISO 14013/5 provides audit program review and assessment material.
· ISO 14020+ labeling issues
· ISO 14030+ provides guidance on performance targets and monitoring within an Environmental Management System
· ISO 14040+ covers life cycle issues
Of all these, ISO14001 is not only the most well known, but is the only ISO 14000 standard against which it is currently possible to be certified by an external certification authority.
ISO14000 – Introduction
After the success of the ISO9000 series of quality standards, the International Standards Organization published a comprehensive set of standards for environmental management. This series of standards is designed to cover the whole area of environmental issues for organizations in the global marketplace.
History of Development
The ISO 14000 series emerged primarily as a result of the Uruguay round of the GATT negotiations and the Rio Summit on the Environment held in 1992. While GATT concentrates on the need to reduce non-tariff barriers to trade, the Rio Summit generated a commitment to protection of the environment across the world. The environmental field has seen a steady growth of national and regional standards. The British Standards Institution has BS 7750 , the Canadian Standards Association has environmental management, auditing, eco-labeling and other standards, the European Union has all of these plus the eco-management and audit regulations , and many other countries (e.g. USA, Germany and Japan) have introduced eco-labeling programs.